Sanmyon electronics co., Limited
Direct Line:+86-180-3342-5320
Skype: +8618033425320
Email: sales@sanmpower.com
Delta DPS-200PB-213 A 4.6V(4.14V~5.06V) 40A
Highlight & Features
Output Characteristics: |
|
1.Nominal Output Voltage |
4.6V |
2.Output Voltage Adjustment Range |
4.14~5.06V Adjustable by VR no load condition |
3.Output Current |
0~40A |
4.Output Power |
200W |
5.Rise time |
≤100ms |
6.Start-up Time |
≤500ms |
7.Hold-up Time |
≥10ms |
8.Ripple and noise |
≤200mVp-p |
9.Line Regulation |
±0.2%typ |
10.Load Regulation |
±1%typ |
Input Characteristics: |
|
1.Input Voltage Range |
90-264VAC |
2.Nominal Input Frequency |
47~63HZ |
3.Power factor |
≥0.95@230V/50HZ/full load |
4.Input Current |
100Vac@28A load/4A(rms) Max. 240Vac@full load/2.5A(rms) Max. |
5.Max Inrush Current |
110Vac≤20A 220Vac≤40A |
6.Leakage Current |
240Vac / 50Hz≤1mA |
7.Efficiency(typ) |
230Vac/50Hz @ full load≥88% |
Protection Characteristics: |
|
1.Overload / Overcurrent |
≤65A Auto recovery |
2.Overvoltage |
Shutdown and no damage≤7.5V Auto recovery |
3.Over Temperature |
Hiccup Mode, Non-Latching (Auto-Recovery when the fault is removed) |
4.Short Circuit |
Hiccup Mode, Non-Latching (Auto-Recovery when the fault is removed) |
Environmental Characteristics: |
|
1.Operating temperature |
-25° C to +70° C (-40℃ Cold start) |
2.Storage |
-40° C to +85° C |
3.Operating Humidity |
10 to 95% RH (no condensation) |
4.Storage Humidity |
5 to 95% RH (no condensation) |
5.Electrical Safety |
CB/UL/TUV/CCC/CE/BSMI/FCC |
6.Galvanic Isolation |
Input-Out:3KVAC(10mA),Output-Ground:1.5KVAC(10mA),Output-Ground:500VAC(10mA),1 minute |
7.Harmonics |
JIS C 61000‐3‐2 class D EN 61000‐3‐2 class D |
8.Lighting Surge: |
Refer to IEC61000-4-5 Line to Line:±1KV Line to Earth: ±2KV |
9.EMI |
a) FCC Part 15 Class B b) EN55022 Class B |
Others |
|
1.MTBF |
> 700,000 hrs. as per Telcordia SR-332 I/P: 100Vac, O/P: 100% load, Ta: 35° C |
2.Cooling |
Convection |
3. Weight |
1KG |
4.Dimension |
210*60*30(L*W*H)mm |
Output De-rating VS Input Voltage:
Output De-rating VS Environment temperature:
Mechanical Drawing:
Refer to output power de-rating curve, add less than 450mm*450mm*3mm aluminum plate auxiliary cooling: