Shenzhen Xiangming Electronics Co., Ltd
Direct Line:+86-180-3342-5320
Skype: +8618033425320
Email: sales@sanmpower.com
Delta MDS-400ADB12 AA 12V 400W
Highlights & Features
Output Characteristics: |
|
1.Nominal Output Voltage |
12V |
2.Output Voltage Tolerance |
±3% |
3.Output Current |
0-33.33A (with 20 CFM forced air) |
4.Output Power |
400W max with 20 CFM air cooling |
5.Rise Time |
100ms |
6.Start-up Time |
2000ms@115Vac |
7.Hold-up Time |
10ms @ 100Vac and 115Vac, with 400W load |
8.Ripple and noise |
150mVpk-pkVrated@ Full load |
9.Line Regulation |
±0.5% |
10.Load Regulation |
±1% |
Input Characteristics: |
|
1.Input Voltage Range |
85-264Vac |
2.Nominal Input Frequency |
47-63Hz |
3.Power factor |
0.95 @ 115V/50Hz, 230V/50Hz, full load |
4.Input Current |
5.5A |
5.Max Inrush Current |
40A@230Vac, cold start |
6.Leakage Current |
0.1mA @ NC, 0.3mA @ SFC1) |
7.Efficiency |
89.5% @ 115Vac/60Hz 91.5%@ 230Vac/50Hz |
Protection Characteristics: |
|
1.Overload / Overcurrent |
135% of rated voltage, Latch Mode |
2.Overvoltage |
Main output 160% of ratedcurrent Hiccup Mode(Non-Latching, Auto-Recovery) |
3.Over Temperature |
Latch Mode |
4.Short Circuit |
Hiccup Mode, Non-Latching (Auto-Recovery when the fault is removed) |
Environmental Characteristics: |
|
1.Operating temperature |
-10°C to +70°C (Cold start at -20°C) |
2.Storage |
-40°C to +85°C |
3.Operating Humidity |
5 to 95% RH (no condensation) |
4.Storage Humidity |
10 to 95% RH (no condensation) |
5.Electrical Safety |
TUV UL/Cul/CB/CCC |
6.Galvanic Isolation |
Input-Out:4KVAC(10mA),Input-Ground:1.5KVAC(10mA),Output-Ground:1.5KVAC(10mA) |
7.Harmonics |
IEC/EN 61000-3-2, Class D |
8.Lighting Surge: |
Refer to IEC1000-4-5 Line to Line:±1KV Line to Earth: ±2KV |
9.EMI |
EN55011/EN55022,FCC Title 47:Class B |
Others |
|
1.MTBF |
800 kHrs based on Telecordia SR-332 (Min) |
2.Cooling |
N/A |
3. Weight |
605 g (1.34 lb) |
4.Dimension |
88.9 x 140.0 x 45.0 mm(3.5 x 5.5 x 1.75 inch) |