parameter

LN	E –	□V	100W	□	□	□
LED Driver	Product Series E – High efficiency and PFC	Output Voltage 12V 24V 36V 48V	Output Power (100W series model)	Packge Type A – IP65 with potentiometers to adjust output voltage & constant current level D – IP67 with dimming cable to adjust constant current level	Safety Approval A – UL approval C – ENEC, CE, KC, PSE and CCC approval	Variable A – Delta standard

Output Characteristics		LNE-12V100W☐☐☐	LNE-24V100W☐☐☐	LNE-36V100W☐☐☐	LNE-48V100W☐☐☐
1. Norminal Output Voltage		12V	24V	36V	48V
2. LED System Voltage Range in CC Mode		6-12Vdc	12-24Vdc	18-36Vdc	24-48Vdc
Output Voltage Adjustment Rangenote1		10.8-13.5V	22.0-27.0V	33.0-40.0V	43.0-53.0V
3. Output Current		8A	4A	2.65A	2A
Output Current Adjustment Rangenote1		4.0-8.0A	2.0-4.0A	1.325-2.65A	1.0-2.0A
4. Output Power		96W	96W	95.4W	96W
5. Rise Time		< 50ms @ 115Vac & 230Vac & 277Vac
6. Start-up time		1200ms typ. @ 115Vac (100% load)
		500ms typ. @ 230Vac & 277Vac (100% load)
7. Hold-up time		16ms typ. @ 115Vac & 230Vac & 277Vac (100% load)
8. Ripple and noise		< 150mVpp	< 150mVpp	< 200mVpp	< 200mVpp
9. Line regulation		± 0.5%
10. Load regulation		± 2.0%	± 1.0%	± 0.5%	± 0.5%
Note1:For LNE-☐V100WA☐☐ package type only.
Input Characteristics
1. Input Frequency Range		90-305Vac(LNE-☐V100W☐A☐) 90-264Vac(LNE-☐V100W☐C☐)
2. Norminal Input Frequency		47-63Hz
3. Power Factor(100% Load)		0.98 typ.@ 115Vac
		0.95 typ. @ 230Vac
		0.93 typ. @ 277Vac
4. Input current		1.30A max. @ 115Vac
		0.65A max. @ 230Vac
		0.60A max. @ 277Vac
5. Max Inrush Current		65A typ. @ 230Vac
6. Leakage Current		< 0.75mA @ 305Vac (LNE-☐V100W☐A☐) < 0.75mA @ 264Vac (LNE-☐V100W☐C☐)
5. Efficiency(typ)	115Vac	90.0% typ.	92.0% typ.	91.5% typ.	92.0% typ.
	230Vac	92.0% typ.	93.0% typ.	93.0% typ.	93.0% typ.
	277Vac	92.0% typ.	93.0% typ.	92.5% typ.	93.0% typ.
Protection Characteristics
1. Over Load/Over Current		95-108%of rated load current, constant current limit Auto-Recovery when the fault is removed
2. Over Voltage		13.8-16.8V, Latch Mode	27.6-33.6V, Latch Mode	41.4-50.4V, Latch Mode	55.2-67.2V, Latch Mode
3. Over Temperature		Hiccup Mode, Auto-Recovery when the fault is removed
4. Short Circuit		Constant current limit , Auto-Recovery when the fault is removed
5. Degree of Protection		IP65(LNE-☐V100W A☐☐) IP67(LNE-☐V100W D☐☐)
Environmental Characteristics
1. Operating Temperature		-40°C to +70°C
2. Storage		-40°C to +85°C
3. Electric Safety		LNE-☐V100W☐C☐: CB scheme to IEC 61347-1, IEC 61347-2-13 ENEC to EN 61347-1, EN 61347-2-13, EN 62384 CCC to GB19510.1, GB19510.14 KC to KC61347-1, KC61347-2-13, KC62384 PSE to J61347-1, J61347-2-13 LNE-☐V100W☐A☐: cRUus to UL 8750 and CAN/CSA C22.2 No. 60950-1
4. CE		In conformance with EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC (LNE-☐V100W☐C☐)
5. Galvanic Isolation		Input to output:3.85KVac/Input to Ground:2.0KVac/Output to Ground:1.5KVac
6. Harmonics		IEC/EN 61000-3-2, Class C; GB17625.1 (THD conditions: 115Vac & 230Vac @ ≥ 60% load, 277Vac @ ≥ 75% load)
7. Lighting Surge		Level 5 Criteria B2) Common Mode3): 6kV Differential Mode4): 4kV
8. EMI		CISPR 15, EN 55015, GB17743 Compliance to CISPR 22, EN 55022, FCC Title 47: Class B
Other Characteristics
1. MTBF		> 700,000 hrs. per Telcordia SR-332 at Input: 115Vac, Output: 100% load, Ta: 25°C
2. Cooling		Convection
3. Weight		0.98 kg
4. Dimension		220 x 68 x 38.8 mm (8.66 x 2.68 x 1.53 inch)
5. Wire	Input	VDE	H05RN-F3G1.0mm 2	Line: Brown Neutral: Blue, PE: Green/Yellow
		UL	SJTW 18AWGX3C	Line: Brown Neutral: Blue, PE: Green/Yellow
	Output	VDE	H07RN-F2x1.5mm 2	Positive: Red, Negative: Black
		UL	SJTW 14AWGX2C	Positive: Red, Negative: Black
	Dimming	VDE	H05RN-F2x1.0mm 2	Positive: White, Negative: Blue
		UL	SJTW 18AWGX2C	Positive: White, Negative: Blue